| Customization: | Available |
|---|---|
| After-sales Service: | Prodution Introduction-Dilivery Goods-Install etc |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| IADC | Rock formation | WOB (KN/mm) | PRM(r/min) |
| 417/427/437 | Low compressive strength, high drill-ability and extremely soft formation, like shale, clay, sandstone, conglomerate etc | 0.35~0.90 | 140~70 |
| 447 | Low compressive strength, high drill-ability and soft formation, like shale, clay, sandstone, soft limestone, salt rock, plaster etc. | 0.35~1.00 | 140~60 |
| 517 | Low compressive strength, high drill-ability and soft formation, like shale, clay, sandstone, soft limestone, salt rock, etc | 0.35~1.05 | 120~50 |
| 527 | Soft formation with low compressive, like Low compressive strength, high drill-ability and soft formation, like shale, clay, sandstone, soft limestone, salt rock, anhydrite etc. | 0.35~1.05 | 120~50 |
| 537/547 | Low compressive strength, medium hard formation with hard abrasive interlayer, like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. | 0.50~1.05 | 110~40 |
| 617/627 | High compressive strength, medium hard and thick hard interlayer, like hard shale, limestone, sandstone, dolomite, etc. | 0.50~1.05 | 80~40 |
| 637/737 | High compressive strength, medium hard and high abrasive formation, like limestone, dolomite, sandstone, chert, etc. | 0.7~1.20 | 70~40 |
| Bit Size(inch) | Bit Size(mm) | Bit Type |
| 3 1/2 | 88.9 | HR527 |
| 4 5/8 | 117.5 | HR126 HR517 |
| 4 3/4 | 120.7 | HR116 |
| 5 7/8 | 149.2 | HR216 HR537 HR547 HR637 |
| 6 | 152.4 | HR117 HR216 HR246 HR517 HR547 |
| 6 1/4 | 158.8 | HR127 HR247 HR517 HR527 HR547 HR637 |
| 6 1/2 | 165.1 | HR127 HR217 HR517 HR537 |
| 6 3/4 | 171.5 | HR116 HR447 HR537 |
| 7 1/2 | 190.5 | HR127 HR217 HR517 HR517 HR527 HR527 HR617 |
| 7 7/8 | 200 | HR117 HR437 HR517 HR527 HR537 HR547 HR547 HR617 HR627 HR637 |
| 8 3/8 | 212.7 | HR217 HR527 HR547 |
| 8 1/2 | 215.9 | HR117 HR127 HR137 HR217 HR247 HR437 HR447 HR517 HR527 HR537 HR547 HR617 HR627 HR637 |
| 8 3/4 | 222.3 | HR116 HR437 HR517 HR537 HR627 |
| 9 1/2 | 241.3 | HR117 HR127 HR417 HR437 HR517 HR527 HR537 HR547 HR617 |
| 9 5/8 | 244.5 | HR117 HR127 HR137 HR217 HR437 HR517 HR527 |
| 9 7/8 | 250.8 | HR117 HR127 HR137 HR217 HR417 HR437 HR517 HR527 |
| 10 5/8 | 269.9 | HR127 HR217 HR437 HR517 HR547 |
| 11 5/8 | 295.3 | HR117 HR127 HR137 HR217 HR147 HR517 HR537 HR547 |
| 12 1/4 | 311.2 | HR117 HR127 HR137 HR417 HR437 HR517 HR527 HR537 HR547 HR617 HR627 HR637 |
| 13 5/8 | 346.1 | HR437 HR517 HR537 |
| 13 3/4 | 349.3 | HR437 HR517 HR537 |
| 14 3/4 | 374.7 | HR117 HR127 HR137 HR517 HR527 |
| 15 1/2 | 393.7 | HR127 HR217 HR517 HR527 HR537 HR547 |
| 16 | 406.4 | HR117 HR127 HR127 HR517 HR527 HR537 HR547 |
| 17 1/2 | 444.5 | HR117 HR127 HR137 HR437 HR517 HR527 HR537 HR547 |
| 18 | 457.2 | HR547 |
| 20 | 508 | HR117 HR217 HR515 HR535 |
| 22 | 558.8 | HR117 HR217 HR515 HR535 |
| 24 | 609.6 | HR117 HR217 HR515 HR535 |
| 26 | 660.4 | HR117 HR217 HR515 HR535 |
| 28 | 711.2 | HR117 HR217 HR515 HR535 |
| 36 | 914.4 | HR117 HR217 HR515 HR535 |
Cutting Structure
The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit
Gauge Structure
Multiple gague protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life.
Bearing Structure
High precision journal bearing with two thrust faces,Balls lock the cone.Hardfaced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved.and suitable for high rotary speed
Seal and Lubrication
The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force,and achieves the bearing seal.In the drilling,metal seals are relatively dynamic,and the energizers are static.This will improve the reliability and durability of bearing seal.The pressure compensator system and advanced grease can greatly increase the lubricating reliability.
COMPANY PROFILE
Pearldrill is a leader in the manufacture and development of many kinds of bits in China. We provide the best quality PDC coring drill, DTH drill, Tri drill bits etc to the market, all types of non-coring or coring drill traces. Our drill bits are used for well drilling, mining and construction contractors. Our drill bit has been tested and verified by time, with wear resistance and fast drilling speed. Different drill bits can be customized according to different rock formations. The engineering time is greatly shortened, and the maximum performance is exerted in the operation during drilling. Our products are durable and reliable. Our products are the preferred drill bits for drilling engineers in many countries because of our precise design and efficient drilling during use.
| Packaging |
| Wood Box Fumigation Tray if necessary Other special package can be applied according to customer's need |
| Delivery |
| Prepared to deliver within 1 week, if in stock Depends on order quantity, when out of stock Transportation:By sea or air |
DIY customization: please provide your rock formation information or detailed size drawings.
Free samples: some samples can be provided free of charge.
Payment:T/T L/C,D/A,D/P,Western Union,MoneyGram.
){kind=link}